UnsafeRawBufferPointer

struct UnsafeRawBufferPointer

A nonowning collection interface to the bytes in a region of memory.

Inheritance Collection, CustomDebugStringConvertible, Sequence
Associated Types
public typealias SubSequence = Slice<UnsafeRawBufferPointer>

This associated type appears as a requirement in the Sequence protocol, but it is restated here with stricter constraints. In a collection, the subsequence should also conform to Collection.

public typealias Element = UInt8
public typealias Index = Int

Valid indices consist of the position of every element and a "past the end" position that's not valid for use as a subscript argument.

public typealias Indices = Range<Int>
Nested Types UnsafeRawBufferPointer.Iterator

You can use an UnsafeRawBufferPointer instance in low-level operations to eliminate uniqueness checks and release mode bounds checks. Bounds checks are always performed in debug mode.

An UnsafeRawBufferPointer instance is a view of the raw bytes in a region of memory. Each byte in memory is viewed as a UInt8 value independent of the type of values held in that memory. Reading from memory through a raw buffer is an untyped operation.

In addition to its collection interface, an UnsafeRawBufferPointer instance also supports the load(fromByteOffset:as:) method provided by UnsafeRawPointer, including bounds checks in debug mode.

To access the underlying memory through typed operations, the memory must be bound to a trivial type.

Note: A trivial type can be copied bit for bit with no indirection or reference-counting operations. Generally, native Swift types that do not contain strong or weak references or other forms of indirection are trivial, as are imported C structs and enums. Copying memory that contains values of nontrivial types can only be done safely with a typed pointer. Copying bytes directly from nontrivial, in-memory values does not produce valid copies and can only be done by calling a C API, such as memmove().

UnsafeRawBufferPointer Semantics

An UnsafeRawBufferPointer instance is a view into memory and does not own the memory that it references. Copying a variable or constant of type UnsafeRawBufferPointer does not copy the underlying memory. However, initializing another collection with an UnsafeRawBufferPointer instance copies bytes out of the referenced memory and into the new collection.

The following example uses someBytes, an UnsafeRawBufferPointer instance, to demonstrate the difference between assigning a buffer pointer and using a buffer pointer as the source for another collection's elements. Here, the assignment to destBytes creates a new, nonowning buffer pointer covering the first n bytes of the memory that someBytes references---nothing is copied:

var destBytes = someBytes[0..<n]

Next, the bytes referenced by destBytes are copied into byteArray, a new [UInt] array, and then the remainder of someBytes is appended to byteArray:

var byteArray: [UInt8] = Array(destBytes)
byteArray += someBytes[n..<someBytes.count]

Initializers

init init(_:) Required

Creates a new buffer over the same memory as the given buffer.

  • Parameter bytes: The buffer to convert.

Declaration

@inlinable public init(_ bytes: UnsafeMutableRawBufferPointer)
init init(_:) Required

Creates a new buffer over the same memory as the given buffer.

  • Parameter bytes: The buffer to convert.

Declaration

@inlinable public init(_ bytes: UnsafeRawBufferPointer)
init init(_:) Required

Creates a raw buffer over the contiguous bytes in the given typed buffer.

  • Parameter buffer: The typed buffer to convert to a raw buffer. The buffer's type T must be a trivial type.

Declaration

@inlinable public init<T>(_ buffer: UnsafeMutableBufferPointer<T>)
init init(_:) Required

Creates a raw buffer over the contiguous bytes in the given typed buffer.

  • Parameter buffer: The typed buffer to convert to a raw buffer. The buffer's type T must be a trivial type.

Declaration

@inlinable public init<T>(_ buffer: UnsafeBufferPointer<T>)
init init(rebasing:) Required

Creates a raw buffer over the same memory as the given raw buffer slice, with the indices rebased to zero.

The new buffer represents the same region of memory as the slice, but its indices start at zero instead of at the beginning of the slice in the original buffer. The following code creates slice, a slice covering part of an existing buffer instance, then rebases it into a new rebased buffer.

let slice = buffer[n...]
let rebased = UnsafeRawBufferPointer(rebasing: slice)

After this code has executed, the following are true:

  • Parameter slice: The raw buffer slice to rebase.

Declaration

@inlinable public init(rebasing slice: Slice<UnsafeRawBufferPointer>)
init init(rebasing:) Required

Creates a raw buffer over the same memory as the given raw buffer slice, with the indices rebased to zero.

The new buffer represents the same region of memory as the slice, but its indices start at zero instead of at the beginning of the slice in the original buffer. The following code creates slice, a slice covering part of an existing buffer instance, then rebases it into a new rebased buffer.

let slice = buffer[n...]
let rebased = UnsafeRawBufferPointer(rebasing: slice)

After this code has executed, the following are true:

  • Parameter slice: The raw buffer slice to rebase.

Declaration

@inlinable public init(rebasing slice: Slice<UnsafeMutableRawBufferPointer>)
init init(start:count:) Required

Creates a buffer over the specified number of contiguous bytes starting at the given pointer.

Declaration

@inlinable public init(start: UnsafeRawPointer?, count: Int)

Instance Variables

var baseAddress Required

A pointer to the first byte of the buffer.

If the baseAddress of this buffer is nil, the count is zero. However, a buffer can have a count of zero even with a non-nil base address.

Declaration

var baseAddress: UnsafeRawPointer?
var count Required

The number of elements in the collection.

To check whether a collection is empty, use its isEmpty property instead of comparing count to zero. Unless the collection guarantees random-access performance, calculating count can be an O(n) operation.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(n), where n is the length of the collection.

Declaration

var count: Int
var count Required

The number of bytes in the buffer.

If the baseAddress of this buffer is nil, the count is zero. However, a buffer can have a count of zero even with a non-nil base address.

Declaration

var count: Int
var debugDescription Required

A textual representation of the buffer, suitable for debugging.

Declaration

var debugDescription: String
var endIndex Required

The "past the end" position---that is, the position one greater than the last valid subscript argument.

The endIndex property of an UnsafeRawBufferPointer instance is always identical to count.

Declaration

var endIndex: UnsafeRawBufferPointer.Index
var first Required

The first element of the collection.

If the collection is empty, the value of this property is nil.

let numbers = [10, 20, 30, 40, 50]
if let firstNumber = numbers.first {
    print(firstNumber)
}
// Prints "10"

Declaration

var first: Self.Element?
var indices Required

The indices that are valid for subscripting the collection, in ascending order.

A collection's indices property can hold a strong reference to the collection itself, causing the collection to be nonuniquely referenced. If you mutate the collection while iterating over its indices, a strong reference can result in an unexpected copy of the collection. To avoid the unexpected copy, use the index(after:) method starting with startIndex to produce indices instead.

var c = MyFancyCollection([10, 20, 30, 40, 50])
var i = c.startIndex
while i != c.endIndex {
    c[i] /= 5
    i = c.index(after: i)
}
// c == MyFancyCollection([2, 4, 6, 8, 10])

Declaration

var indices: UnsafeRawBufferPointer.Indices
var isEmpty Required

A Boolean value indicating whether the collection is empty.

When you need to check whether your collection is empty, use the isEmpty property instead of checking that the count property is equal to zero. For collections that don't conform to RandomAccessCollection, accessing the count property iterates through the elements of the collection.

let horseName = "Silver"
if horseName.isEmpty {
    print("I've been through the desert on a horse with no name.")
} else {
    print("Hi ho, \(horseName)!")
}
// Prints "Hi ho, Silver!")

Complexity: O(1)

Declaration

var isEmpty: Bool
var lazy Required

A sequence containing the same elements as this sequence, but on which some operations, such as map and filter, are implemented lazily.

Declaration

var lazy: LazySequence<Self>
var startIndex Required

Always zero, which is the index of the first byte in a nonempty buffer.

Declaration

var startIndex: UnsafeRawBufferPointer.Index
var underestimatedCount Required

A value less than or equal to the number of elements in the sequence, calculated nondestructively.

The default implementation returns 0. If you provide your own implementation, make sure to compute the value nondestructively.

Complexity: O(1), except if the sequence also conforms to Collection. In this case, see the documentation of Collection.underestimatedCount.

Declaration

var underestimatedCount: Int
var underestimatedCount Required

A value less than or equal to the number of elements in the collection.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(n), where n is the length of the collection.

Declaration

var underestimatedCount: Int

Subscripts

subscript subscript(bounds:) Required

Accesses the bytes in the specified memory region.

  • Parameter bounds: The range of byte offsets to access. The upper and lower bounds of the range must be in the range 0...count.

Declaration

@inlinable public subscript(bounds: Range<Int>) -> UnsafeRawBufferPointer.SubSequence
subscript subscript(i:) Required

Accesses the byte at the given offset in the memory region as a UInt8 value.

  • Parameter i: The offset of the byte to access. i must be in the range 0..<count.

Declaration

@inlinable public subscript(i: Int) -> UnsafeRawBufferPointer.Element
subscript subscript(r:) Required

Accesses the contiguous subrange of the collection's elements specified by a range expression.

The range expression is converted to a concrete subrange relative to this collection. For example, using a PartialRangeFrom range expression with an array accesses the subrange from the start of the range expression until the end of the array.

let streets = ["Adams", "Bryant", "Channing", "Douglas", "Evarts"]
let streetsSlice = streets[2...]
print(streetsSlice)
// ["Channing", "Douglas", "Evarts"]

The accessed slice uses the same indices for the same elements as the original collection uses. This example searches streetsSlice for one of the strings in the slice, and then uses that index in the original array.

let index = streetsSlice.firstIndex(of: "Evarts")    // 4
print(streets[index!])
// "Evarts"

Always use the slice's startIndex property instead of assuming that its indices start at a particular value. Attempting to access an element by using an index outside the bounds of the slice's indices may result in a runtime error, even if that index is valid for the original collection.

print(streetsSlice.startIndex)
// 2
print(streetsSlice[2])
// "Channing"

print(streetsSlice[0])
// error: Index out of bounds
  • Parameter bounds: A range of the collection's indices. The bounds of the range must be valid indices of the collection.

Complexity: O(1)

Declaration

@inlinable public subscript<R>(r: R) where R: RangeExpression, Self.Index == R.Bound -> Self.SubSequence
subscript subscript(x:) Required

Declaration

@inlinable public subscript(x: (UnboundedRange_) -> ()) -> Self.SubSequence

Instance Methods

func allSatisfy(_ predicate: (Self.Element) throws -> Bool) rethrows -> Bool Required

Returns a Boolean value indicating whether every element of a sequence satisfies a given predicate.

The following code uses this method to test whether all the names in an array have at least five characters:

let names = ["Sofia", "Camilla", "Martina", "Mateo", "Nicolás"]
let allHaveAtLeastFive = names.allSatisfy({ $0.count >= 5 })
// allHaveAtLeastFive == true
  • Parameter predicate: A closure that takes an element of the sequence as its argument and returns a Boolean value that indicates whether the passed element satisfies a condition.

Complexity: O(n), where n is the length of the sequence.

Declaration

@inlinable public func allSatisfy(_ predicate: (Self.Element) throws -> Bool) rethrows -> Bool
func bindMemory(to type: T.Type) -> UnsafeBufferPointer<T> Required

Binds this buffer’s memory to the specified type and returns a typed buffer of the bound memory.

Use the bindMemory(to:) method to bind the memory referenced by this buffer to the type T. The memory must be uninitialized or initialized to a type that is layout compatible with T. If the memory is uninitialized, it is still uninitialized after being bound to T.

Warning: A memory location may only be bound to one type at a time. The behavior of accessing memory as a type unrelated to its bound type is undefined.

Declaration

public func bindMemory<T>(to type: T.Type) -> UnsafeBufferPointer<T>
func compactMap(_ transform: (Self.Element) throws -> ElementOfResult?) rethrows -> [ElementOfResult] Required

Returns an array containing the non-nil results of calling the given transformation with each element of this sequence.

Use this method to receive an array of non-optional values when your transformation produces an optional value.

In this example, note the difference in the result of using map and compactMap with a transformation that returns an optional Int value.

let possibleNumbers = ["1", "2", "three", "///4///", "5"]

let mapped: [Int?] = possibleNumbers.map { str in Int(str) }
// [1, 2, nil, nil, 5]

let compactMapped: [Int] = possibleNumbers.compactMap { str in Int(str) }
// [1, 2, 5]
  • Parameter transform: A closure that accepts an element of this sequence as its argument and returns an optional value.

Complexity: O(m + n), where n is the length of this sequence and m is the length of the result.

Declaration

@inlinable public func compactMap<ElementOfResult>(_ transform: (Self.Element) throws -> ElementOfResult?) rethrows -> [ElementOfResult]
func contains(where predicate: (Self.Element) throws -> Bool) rethrows -> Bool Required

Returns a Boolean value indicating whether the sequence contains an element that satisfies the given predicate.

You can use the predicate to check for an element of a type that doesn't conform to the Equatable protocol, such as the HTTPResponse enumeration in this example.

enum HTTPResponse {
    case ok
    case error(Int)
}

let lastThreeResponses: [HTTPResponse] = [.ok, .ok, .error(404)]
let hadError = lastThreeResponses.contains { element in
    if case .error = element {
        return true
    } else {
        return false
    }
}
// 'hadError' == true

Alternatively, a predicate can be satisfied by a range of Equatable elements or a general condition. This example shows how you can check an array for an expense greater than $100.

let expenses = [21.37, 55.21, 9.32, 10.18, 388.77, 11.41]
let hasBigPurchase = expenses.contains { $0 > 100 }
// 'hasBigPurchase' == true
  • Parameter predicate: A closure that takes an element of the sequence as its argument and returns a Boolean value that indicates whether the passed element represents a match.

Complexity: O(n), where n is the length of the sequence.

Declaration

@inlinable public func contains(where predicate: (Self.Element) throws -> Bool) rethrows -> Bool
func deallocate() Required

Deallocates the memory block previously allocated at this buffer pointer’s base address.

This buffer pointer's baseAddress must be nil or a pointer to a memory block previously returned by a Swift allocation method. If baseAddress is nil, this function does nothing. Otherwise, the memory must not be initialized or Pointee must be a trivial type. This buffer pointer's byte count must be equal to the originally allocated size of the memory block.

Declaration

@inlinable public func deallocate()
func distance(from start: Self.Index, to end: Self.Index) -> Int Required

Returns the distance between two indices.

Unless the collection conforms to the BidirectionalCollection protocol, start must be less than or equal to end.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(k), where k is the resulting distance.

Declaration

@inlinable public func distance(from start: Self.Index, to end: Self.Index) -> Int
func drop(while predicate: (Self.Element) throws -> Bool) rethrows -> DropWhileSequence<Self> Required

Returns a sequence by skipping the initial, consecutive elements that satisfy the given predicate.

The following example uses the drop(while:) method to skip over the positive numbers at the beginning of the numbers array. The result begins with the first element of numbers that does not satisfy predicate.

let numbers = [3, 7, 4, -2, 9, -6, 10, 1]
let startingWithNegative = numbers.drop(while: { $0 > 0 })
// startingWithNegative == [-2, 9, -6, 10, 1]

If predicate matches every element in the sequence, the result is an empty sequence.

  • Parameter predicate: A closure that takes an element of the sequence as its argument and returns a Boolean value indicating whether the element should be included in the result.

Complexity: O(k), where k is the number of elements to drop from the beginning of the sequence.

Declaration

@inlinable public func drop(while predicate: (Self.Element) throws -> Bool) rethrows -> DropWhileSequence<Self>
func drop(while predicate: (Self.Element) throws -> Bool) rethrows -> Self.SubSequence Required

Returns a subsequence by skipping elements while predicate returns true and returning the remaining elements.

  • Parameter predicate: A closure that takes an element of the sequence as its argument and returns true if the element should be skipped or false if it should be included. Once the predicate returns false it will not be called again.

Complexity: O(n), where n is the length of the collection.

Declaration

@inlinable public func drop(while predicate: (Self.Element) throws -> Bool) rethrows -> Self.SubSequence
func dropFirst(_ k: Int = 1) -> DropFirstSequence<Self> Required

Returns a sequence containing all but the given number of initial elements.

If the number of elements to drop exceeds the number of elements in the sequence, the result is an empty sequence.

let numbers = [1, 2, 3, 4, 5]
print(numbers.dropFirst(2))
// Prints "[3, 4, 5]"
print(numbers.dropFirst(10))
// Prints "[]"
  • Parameter k: The number of elements to drop from the beginning of the sequence. k must be greater than or equal to zero.

Complexity: O(1), with O(k) deferred to each iteration of the result, where k is the number of elements to drop from the beginning of the sequence.

Declaration

@inlinable public func dropFirst(_ k: Int = 1) -> DropFirstSequence<Self>
func dropFirst(_ k: Int = 1) -> Self.SubSequence Required

Returns a subsequence containing all but the given number of initial elements.

If the number of elements to drop exceeds the number of elements in the collection, the result is an empty subsequence.

let numbers = [1, 2, 3, 4, 5]
print(numbers.dropFirst(2))
// Prints "[3, 4, 5]"
print(numbers.dropFirst(10))
// Prints "[]"
  • Parameter k: The number of elements to drop from the beginning of the collection. k must be greater than or equal to zero.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(k), where k is the number of elements to drop from the beginning of the collection.

Declaration

@inlinable public func dropFirst(_ k: Int = 1) -> Self.SubSequence
func dropLast(_ k: Int = 1) -> [Self.Element] Required

Returns a sequence containing all but the given number of final elements.

The sequence must be finite. If the number of elements to drop exceeds the number of elements in the sequence, the result is an empty sequence.

let numbers = [1, 2, 3, 4, 5]
print(numbers.dropLast(2))
// Prints "[1, 2, 3]"
print(numbers.dropLast(10))
// Prints "[]"
  • Parameter n: The number of elements to drop off the end of the sequence. n must be greater than or equal to zero.

Complexity: O(n), where n is the length of the sequence.

Declaration

@inlinable public func dropLast(_ k: Int = 1) -> [Self.Element]
func dropLast(_ k: Int = 1) -> Self.SubSequence Required

Returns a subsequence containing all but the specified number of final elements.

If the number of elements to drop exceeds the number of elements in the collection, the result is an empty subsequence.

let numbers = [1, 2, 3, 4, 5]
print(numbers.dropLast(2))
// Prints "[1, 2, 3]"
print(numbers.dropLast(10))
// Prints "[]"
  • Parameter k: The number of elements to drop off the end of the collection. k must be greater than or equal to zero.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(n), where n is the length of the collection.

Declaration

@inlinable public func dropLast(_ k: Int = 1) -> Self.SubSequence
func elementsEqual(_ other: OtherSequence, by areEquivalent: (Self.Element, OtherSequence.Element) throws -> Bool) rethrows -> Bool Required

Returns a Boolean value indicating whether this sequence and another sequence contain equivalent elements in the same order, using the given predicate as the equivalence test.

At least one of the sequences must be finite.

The predicate must be a equivalence relation over the elements. That is, for any elements a, b, and c, the following conditions must hold:

Complexity: O(m), where m is the lesser of the length of the sequence and the length of other.

Declaration

@inlinable public func elementsEqual<OtherSequence>(_ other: OtherSequence, by areEquivalent: (Self.Element, OtherSequence.Element) throws -> Bool) rethrows -> Bool where OtherSequence: Sequence
func enumerated() -> EnumeratedSequence<Self> Required

Returns a sequence of pairs (n, x), where n represents a consecutive integer starting at zero and x represents an element of the sequence.

This example enumerates the characters of the string "Swift" and prints each character along with its place in the string.

for (n, c) in "Swift".enumerated() {
    print("\(n): '\(c)'")
}
// Prints "0: 'S'"
// Prints "1: 'w'"
// Prints "2: 'i'"
// Prints "3: 'f'"
// Prints "4: 't'"

When you enumerate a collection, the integer part of each pair is a counter for the enumeration, but is not necessarily the index of the paired value. These counters can be used as indices only in instances of zero-based, integer-indexed collections, such as Array and ContiguousArray. For other collections the counters may be out of range or of the wrong type to use as an index. To iterate over the elements of a collection with its indices, use the zip(_:_:) function.

This example iterates over the indices and elements of a set, building a list consisting of indices of names with five or fewer letters.

let names: Set = ["Sofia", "Camilla", "Martina", "Mateo", "Nicolás"]
var shorterIndices: [Set<String>.Index] = []
for (i, name) in zip(names.indices, names) {
    if name.count <= 5 {
        shorterIndices.append(i)
    }
}

Now that the shorterIndices array holds the indices of the shorter names in the names set, you can use those indices to access elements in the set.

for i in shorterIndices {
    print(names[i])
}
// Prints "Sofia"
// Prints "Mateo"

Complexity: O(1)

Declaration

@inlinable public func enumerated() -> EnumeratedSequence<Self>
func filter(_ isIncluded: (Self.Element) throws -> Bool) rethrows -> [Self.Element] Required

Returns an array containing, in order, the elements of the sequence that satisfy the given predicate.

In this example, filter(_:) is used to include only names shorter than five characters.

let cast = ["Vivien", "Marlon", "Kim", "Karl"]
let shortNames = cast.filter { $0.count < 5 }
print(shortNames)
// Prints "["Kim", "Karl"]"
  • Parameter isIncluded: A closure that takes an element of the sequence as its argument and returns a Boolean value indicating whether the element should be included in the returned array.

Complexity: O(n), where n is the length of the sequence.

Declaration

@inlinable public func filter(_ isIncluded: (Self.Element) throws -> Bool) rethrows -> [Self.Element]
func first(where predicate: (Self.Element) throws -> Bool) rethrows -> Self.Element? Required

Returns the first element of the sequence that satisfies the given predicate.

The following example uses the first(where:) method to find the first negative number in an array of integers:

let numbers = [3, 7, 4, -2, 9, -6, 10, 1]
if let firstNegative = numbers.first(where: { $0 < 0 }) {
    print("The first negative number is \(firstNegative).")
}
// Prints "The first negative number is -2."
  • Parameter predicate: A closure that takes an element of the sequence as its argument and returns a Boolean value indicating whether the element is a match.

Complexity: O(n), where n is the length of the sequence.

Declaration

@inlinable public func first(where predicate: (Self.Element) throws -> Bool) rethrows -> Self.Element?
func firstIndex(where predicate: (Self.Element) throws -> Bool) rethrows -> Self.Index? Required

Returns the first index in which an element of the collection satisfies the given predicate.

You can use the predicate to find an element of a type that doesn't conform to the Equatable protocol or to find an element that matches particular criteria. Here's an example that finds a student name that begins with the letter "A":

let students = ["Kofi", "Abena", "Peter", "Kweku", "Akosua"]
if let i = students.firstIndex(where: { $0.hasPrefix("A") }) {
    print("\(students[i]) starts with 'A'!")
}
// Prints "Abena starts with 'A'!"
  • Parameter predicate: A closure that takes an element as its argument and returns a Boolean value that indicates whether the passed element represents a match.

Complexity: O(n), where n is the length of the collection.

Declaration

@inlinable public func firstIndex(where predicate: (Self.Element) throws -> Bool) rethrows -> Self.Index?
func flatMap(_ transform: (Self.Element) throws -> SegmentOfResult) rethrows -> [SegmentOfResult.Element] Required

Returns an array containing the concatenated results of calling the given transformation with each element of this sequence.

Use this method to receive a single-level collection when your transformation produces a sequence or collection for each element.

In this example, note the difference in the result of using map and flatMap with a transformation that returns an array.

let numbers = [1, 2, 3, 4]

let mapped = numbers.map { Array(repeating: $0, count: $0) }
// [[1], [2, 2], [3, 3, 3], [4, 4, 4, 4]]

let flatMapped = numbers.flatMap { Array(repeating: $0, count: $0) }
// [1, 2, 2, 3, 3, 3, 4, 4, 4, 4]

In fact, s.flatMap(transform) is equivalent to Array(s.map(transform).joined()).

  • Parameter transform: A closure that accepts an element of this sequence as its argument and returns a sequence or collection.

Complexity: O(m + n), where n is the length of this sequence and m is the length of the result.

Declaration

@inlinable public func flatMap<SegmentOfResult>(_ transform: (Self.Element) throws -> SegmentOfResult) rethrows -> [SegmentOfResult.Element] where SegmentOfResult: Sequence
func flatMap(_ transform: (Self.Element) throws -> ElementOfResult?) rethrows -> [ElementOfResult] Required

Declaration

@available(swift, deprecated: 4.1, renamed: "compactMap(_:)", message: "Please use compactMap(_:) for the case where closure returns an optional value") public func flatMap<ElementOfResult>(_ transform: (Self.Element) throws -> ElementOfResult?) rethrows -> [ElementOfResult]
func forEach(_ body: (Self.Element) throws -> Void) rethrows Required

Calls the given closure on each element in the sequence in the same order as a for-in loop.

The two loops in the following example produce the same output:

let numberWords = ["one", "two", "three"]
for word in numberWords {
    print(word)
}
// Prints "one"
// Prints "two"
// Prints "three"

numberWords.forEach { word in
    print(word)
}
// Same as above

Using the forEach method is distinct from a for-in loop in two important ways:

  1. You cannot use a break or continue statement to exit the current call of the body closure or skip subsequent calls.
  2. Using the return statement in the body closure will exit only from the current call to body, not from any outer scope, and won't skip subsequent calls.
  • Parameter body: A closure that takes an element of the sequence as a parameter.

Declaration

@inlinable public func forEach(_ body: (Self.Element) throws -> Void) rethrows
func formIndex(_ i: inout Self.Index, offsetBy distance: Int) Required

Offsets the given index by the specified distance.

The value passed as distance must not offset i beyond the bounds of the collection.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(k), where k is the absolute value of distance.

Declaration

@inlinable public func formIndex(_ i: inout Self.Index, offsetBy distance: Int)
func formIndex(_ i: inout Self.Index, offsetBy distance: Int, limitedBy limit: Self.Index) -> Bool Required

Offsets the given index by the specified distance, or so that it equals the given limiting index.

The value passed as distance must not offset i beyond the bounds of the collection, unless the index passed as limit prevents offsetting beyond those bounds.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(k), where k is the absolute value of distance.

Declaration

@inlinable public func formIndex(_ i: inout Self.Index, offsetBy distance: Int, limitedBy limit: Self.Index) -> Bool
func formIndex(after i: inout Self.Index) Required

Replaces the given index with its successor.

  • Parameter i: A valid index of the collection. i must be less than endIndex.

Declaration

@inlinable public func formIndex(after i: inout Self.Index)
func index(_ i: Self.Index, offsetBy distance: Int) -> Self.Index Required

Returns an index that is the specified distance from the given index.

The following example obtains an index advanced four positions from a string's starting index and then prints the character at that position.

let s = "Swift"
let i = s.index(s.startIndex, offsetBy: 4)
print(s[i])
// Prints "t"

The value passed as distance must not offset i beyond the bounds of the collection.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(k), where k is the absolute value of distance.

Declaration

@inlinable public func index(_ i: Self.Index, offsetBy distance: Int) -> Self.Index
func index(_ i: Self.Index, offsetBy distance: Int, limitedBy limit: Self.Index) -> Self.Index? Required

Returns an index that is the specified distance from the given index, unless that distance is beyond a given limiting index.

The following example obtains an index advanced four positions from a string's starting index and then prints the character at that position. The operation doesn't require going beyond the limiting s.endIndex value, so it succeeds.

let s = "Swift"
if let i = s.index(s.startIndex, offsetBy: 4, limitedBy: s.endIndex) {
    print(s[i])
}
// Prints "t"

The next example attempts to retrieve an index six positions from s.startIndex but fails, because that distance is beyond the index passed as limit.

let j = s.index(s.startIndex, offsetBy: 6, limitedBy: s.endIndex)
print(j)
// Prints "nil"

The value passed as distance must not offset i beyond the bounds of the collection, unless the index passed as limit prevents offsetting beyond those bounds.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(k), where k is the absolute value of distance.

Declaration

@inlinable public func index(_ i: Self.Index, offsetBy distance: Int, limitedBy limit: Self.Index) -> Self.Index?
func lexicographicallyPrecedes(_ other: OtherSequence, by areInIncreasingOrder: (Self.Element, Self.Element) throws -> Bool) rethrows -> Bool Required

Returns a Boolean value indicating whether the sequence precedes another sequence in a lexicographical (dictionary) ordering, using the given predicate to compare elements.

The predicate must be a strict weak ordering over the elements. That is, for any elements a, b, and c, the following conditions must hold:

Note: This method implements the mathematical notion of lexicographical ordering, which has no connection to Unicode. If you are sorting strings to present to the end user, use String APIs that perform localized comparison instead.

Complexity: O(m), where m is the lesser of the length of the sequence and the length of other.

Declaration

@inlinable public func lexicographicallyPrecedes<OtherSequence>(_ other: OtherSequence, by areInIncreasingOrder: (Self.Element, Self.Element) throws -> Bool) rethrows -> Bool where OtherSequence: Sequence, Self.Element == OtherSequence.Element
func load(fromByteOffset offset: Int = 0, as type: T.Type) -> T Required

Returns a new instance of the given type, read from the buffer pointer's raw memory at the specified byte offset.

You can use this method to create new values from the buffer pointer's underlying bytes. The following example creates two new Int32 instances from the memory referenced by the buffer pointer someBytes. The bytes for a are copied from the first four bytes of someBytes, and the bytes for b are copied from the next four bytes.

let a = someBytes.load(as: Int32.self)
let b = someBytes.load(fromByteOffset: 4, as: Int32.self)

The memory to read for the new instance must not extend beyond the buffer pointer's memory region---that is, offset + MemoryLayout<T>.size must be less than or equal to the buffer pointer's count.

Declaration

@inlinable public func load<T>(fromByteOffset offset: Int = 0, as type: T.Type) -> T
func makeIterator() -> UnsafeRawBufferPointer.Iterator Required

Returns an iterator over the bytes of this sequence.

Declaration

@inlinable public func makeIterator() -> UnsafeRawBufferPointer.Iterator
func map(_ transform: (Self.Element) throws -> T) rethrows -> [T] Required

Returns an array containing the results of mapping the given closure over the sequence's elements.

In this example, map is used first to convert the names in the array to lowercase strings and then to count their characters.

let cast = ["Vivien", "Marlon", "Kim", "Karl"]
let lowercaseNames = cast.map { $0.lowercased() }
// 'lowercaseNames' == ["vivien", "marlon", "kim", "karl"]
let letterCounts = cast.map { $0.count }
// 'letterCounts' == [6, 6, 3, 4]
  • Parameter transform: A mapping closure. transform accepts an element of this sequence as its parameter and returns a transformed value of the same or of a different type.

Complexity: O(n), where n is the length of the sequence.

Declaration

@inlinable public func map<T>(_ transform: (Self.Element) throws -> T) rethrows -> [T]
func map(_ transform: (Self.Element) throws -> T) rethrows -> [T] Required

Returns an array containing the results of mapping the given closure over the sequence's elements.

In this example, map is used first to convert the names in the array to lowercase strings and then to count their characters.

let cast = ["Vivien", "Marlon", "Kim", "Karl"]
let lowercaseNames = cast.map { $0.lowercased() }
// 'lowercaseNames' == ["vivien", "marlon", "kim", "karl"]
let letterCounts = cast.map { $0.count }
// 'letterCounts' == [6, 6, 3, 4]
  • Parameter transform: A mapping closure. transform accepts an element of this sequence as its parameter and returns a transformed value of the same or of a different type.

Declaration

@inlinable public func map<T>(_ transform: (Self.Element) throws -> T) rethrows -> [T]
func max(by areInIncreasingOrder: (Self.Element, Self.Element) throws -> Bool) rethrows -> Self.Element? Required

Returns the maximum element in the sequence, using the given predicate as the comparison between elements.

The predicate must be a strict weak ordering over the elements. That is, for any elements a, b, and c, the following conditions must hold:

This example shows how to use the max(by:) method on a dictionary to find the key-value pair with the highest value.

let hues = ["Heliotrope": 296, "Coral": 16, "Aquamarine": 156]
let greatestHue = hues.max { a, b in a.value < b.value }
print(greatestHue)
// Prints "Optional(("Heliotrope", 296))"
  • Parameter areInIncreasingOrder: A predicate that returns true if its first argument should be ordered before its second argument; otherwise, false.

Complexity: O(n), where n is the length of the sequence.

Declaration

@warn_unqualified_access @inlinable public func max(by areInIncreasingOrder: (Self.Element, Self.Element) throws -> Bool) rethrows -> Self.Element?
func min(by areInIncreasingOrder: (Self.Element, Self.Element) throws -> Bool) rethrows -> Self.Element? Required

Returns the minimum element in the sequence, using the given predicate as the comparison between elements.

The predicate must be a strict weak ordering over the elements. That is, for any elements a, b, and c, the following conditions must hold:

This example shows how to use the min(by:) method on a dictionary to find the key-value pair with the lowest value.

let hues = ["Heliotrope": 296, "Coral": 16, "Aquamarine": 156]
let leastHue = hues.min { a, b in a.value < b.value }
print(leastHue)
// Prints "Optional(("Coral", 16))"
  • Parameter areInIncreasingOrder: A predicate that returns true if its first argument should be ordered before its second argument; otherwise, false.

Complexity: O(n), where n is the length of the sequence.

Declaration

@warn_unqualified_access @inlinable public func min(by areInIncreasingOrder: (Self.Element, Self.Element) throws -> Bool) rethrows -> Self.Element?
func prefix(_ maxLength: Int) -> PrefixSequence<Self> Required

Returns a sequence, up to the specified maximum length, containing the initial elements of the sequence.

If the maximum length exceeds the number of elements in the sequence, the result contains all the elements in the sequence.

let numbers = [1, 2, 3, 4, 5]
print(numbers.prefix(2))
// Prints "[1, 2]"
print(numbers.prefix(10))
// Prints "[1, 2, 3, 4, 5]"
  • Parameter maxLength: The maximum number of elements to return. The value of maxLength must be greater than or equal to zero.

Complexity: O(1)

Declaration

@inlinable public func prefix(_ maxLength: Int) -> PrefixSequence<Self>
func prefix(_ maxLength: Int) -> Self.SubSequence Required

Returns a subsequence, up to the specified maximum length, containing the initial elements of the collection.

If the maximum length exceeds the number of elements in the collection, the result contains all the elements in the collection.

let numbers = [1, 2, 3, 4, 5]
print(numbers.prefix(2))
// Prints "[1, 2]"
print(numbers.prefix(10))
// Prints "[1, 2, 3, 4, 5]"
  • Parameter maxLength: The maximum number of elements to return. maxLength must be greater than or equal to zero.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(k), where k is the number of elements to select from the beginning of the collection.

Declaration

@inlinable public func prefix(_ maxLength: Int) -> Self.SubSequence
func prefix(through position: Self.Index) -> Self.SubSequence Required

Returns a subsequence from the start of the collection through the specified position.

The resulting subsequence includes the element at the position end. The following example searches for the index of the number 40 in an array of integers, and then prints the prefix of the array up to, and including, that index:

let numbers = [10, 20, 30, 40, 50, 60]
if let i = numbers.firstIndex(of: 40) {
    print(numbers.prefix(through: i))
}
// Prints "[10, 20, 30, 40]"

Using the prefix(through:) method is equivalent to using a partial closed range as the collection's subscript. The subscript notation is preferred over prefix(through:).

if let i = numbers.firstIndex(of: 40) {
    print(numbers[...i])
}
// Prints "[10, 20, 30, 40]"
  • Parameter end: The index of the last element to include in the resulting subsequence. end must be a valid index of the collection that is not equal to the endIndex property.

Complexity: O(1)

Declaration

@inlinable public func prefix(through position: Self.Index) -> Self.SubSequence
func prefix(upTo end: Self.Index) -> Self.SubSequence Required

Returns a subsequence from the start of the collection up to, but not including, the specified position.

The resulting subsequence does not include the element at the position end. The following example searches for the index of the number 40 in an array of integers, and then prints the prefix of the array up to, but not including, that index:

let numbers = [10, 20, 30, 40, 50, 60]
if let i = numbers.firstIndex(of: 40) {
    print(numbers.prefix(upTo: i))
}
// Prints "[10, 20, 30]"

Passing the collection's starting index as the end parameter results in an empty subsequence.

print(numbers.prefix(upTo: numbers.startIndex))
// Prints "[]"

Using the prefix(upTo:) method is equivalent to using a partial half-open range as the collection's subscript. The subscript notation is preferred over prefix(upTo:).

if let i = numbers.firstIndex(of: 40) {
    print(numbers[..<i])
}
// Prints "[10, 20, 30]"
  • Parameter end: The "past the end" index of the resulting subsequence. end must be a valid index of the collection.

Complexity: O(1)

Declaration

@inlinable public func prefix(upTo end: Self.Index) -> Self.SubSequence
func prefix(while predicate: (Self.Element) throws -> Bool) rethrows -> [Self.Element] Required

Returns a sequence containing the initial, consecutive elements that satisfy the given predicate.

The following example uses the prefix(while:) method to find the positive numbers at the beginning of the numbers array. Every element of numbers up to, but not including, the first negative value is included in the result.

let numbers = [3, 7, 4, -2, 9, -6, 10, 1]
let positivePrefix = numbers.prefix(while: { $0 > 0 })
// positivePrefix == [3, 7, 4]

If predicate matches every element in the sequence, the resulting sequence contains every element of the sequence.

  • Parameter predicate: A closure that takes an element of the sequence as its argument and returns a Boolean value indicating whether the element should be included in the result.

Complexity: O(k), where k is the length of the result.

Declaration

@inlinable public func prefix(while predicate: (Self.Element) throws -> Bool) rethrows -> [Self.Element]
func prefix(while predicate: (Self.Element) throws -> Bool) rethrows -> Self.SubSequence Required

Returns a subsequence containing the initial elements until predicate returns false and skipping the remaining elements.

  • Parameter predicate: A closure that takes an element of the sequence as its argument and returns true if the element should be included or false if it should be excluded. Once the predicate returns false it will not be called again.

Complexity: O(n), where n is the length of the collection.

Declaration

@inlinable public func prefix(while predicate: (Self.Element) throws -> Bool) rethrows -> Self.SubSequence
func randomElement() -> Self.Element? Required

Returns a random element of the collection.

Call randomElement() to select a random element from an array or another collection. This example picks a name at random from an array:

let names = ["Zoey", "Chloe", "Amani", "Amaia"]
let randomName = names.randomElement()!
// randomName == "Amani"

This method is equivalent to calling randomElement(using:), passing in the system's default random generator.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(n), where n is the length of the collection.

Declaration

@inlinable public func randomElement() -> Self.Element?
func randomElement(using generator: inout T) -> Self.Element? Required

Returns a random element of the collection, using the given generator as a source for randomness.

Call randomElement(using:) to select a random element from an array or another collection when you are using a custom random number generator. This example picks a name at random from an array:

let names = ["Zoey", "Chloe", "Amani", "Amaia"]
let randomName = names.randomElement(using: &myGenerator)!
// randomName == "Amani"
  • Parameter generator: The random number generator to use when choosing a random element.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(n), where n is the length of the collection.

Note: The algorithm used to select a random element may change in a future version of Swift. If you're passing a generator that results in the same sequence of elements each time you run your program, that sequence may change when your program is compiled using a different version of Swift.

Declaration

@inlinable public func randomElement<T>(using generator: inout T) -> Self.Element? where T: RandomNumberGenerator
func reduce(_ initialResult: Result, _ nextPartialResult: (Result, Self.Element) throws -> Result) rethrows -> Result Required

Returns the result of combining the elements of the sequence using the given closure.

Use the reduce(_:_:) method to produce a single value from the elements of an entire sequence. For example, you can use this method on an array of numbers to find their sum or product.

The nextPartialResult closure is called sequentially with an accumulating value initialized to initialResult and each element of the sequence. This example shows how to find the sum of an array of numbers.

let numbers = [1, 2, 3, 4]
let numberSum = numbers.reduce(0, { x, y in
    x + y
})
// numberSum == 10

When numbers.reduce(_:_:) is called, the following steps occur:

  1. The nextPartialResult closure is called with initialResult---0 in this case---and the first element of numbers, returning the sum: 1.
  2. The closure is called again repeatedly with the previous call's return value and each element of the sequence.
  3. When the sequence is exhausted, the last value returned from the closure is returned to the caller.

If the sequence has no elements, nextPartialResult is never executed and initialResult is the result of the call to reduce(_:_:).

Complexity: O(n), where n is the length of the sequence.

Declaration

@inlinable public func reduce<Result>(_ initialResult: Result, _ nextPartialResult: (Result, Self.Element) throws -> Result) rethrows -> Result
func reduce(into initialResult: Result, _ updateAccumulatingResult: (inout Result, Self.Element) throws -> ()) rethrows -> Result Required

Returns the result of combining the elements of the sequence using the given closure.

Use the reduce(into:_:) method to produce a single value from the elements of an entire sequence. For example, you can use this method on an array of integers to filter adjacent equal entries or count frequencies.

This method is preferred over reduce(_:_:) for efficiency when the result is a copy-on-write type, for example an Array or a Dictionary.

The updateAccumulatingResult closure is called sequentially with a mutable accumulating value initialized to initialResult and each element of the sequence. This example shows how to build a dictionary of letter frequencies of a string.

let letters = "abracadabra"
let letterCount = letters.reduce(into: [:]) { counts, letter in
    counts[letter, default: 0] += 1
}
// letterCount == ["a": 5, "b": 2, "r": 2, "c": 1, "d": 1]

When letters.reduce(into:_:) is called, the following steps occur:

  1. The updateAccumulatingResult closure is called with the initial accumulating value---[:] in this case---and the first character of letters, modifying the accumulating value by setting 1 for the key "a".
  2. The closure is called again repeatedly with the updated accumulating value and each element of the sequence.
  3. When the sequence is exhausted, the accumulating value is returned to the caller.

If the sequence has no elements, updateAccumulatingResult is never executed and initialResult is the result of the call to reduce(into:_:).

Complexity: O(n), where n is the length of the sequence.

Declaration

@inlinable public func reduce<Result>(into initialResult: Result, _ updateAccumulatingResult: (inout Result, Self.Element) throws -> ()) rethrows -> Result
func reversed() -> [Self.Element] Required

Returns an array containing the elements of this sequence in reverse order.

The sequence must be finite.

Complexity: O(n), where n is the length of the sequence.

Declaration

@inlinable public func reversed() -> [Self.Element]
func shuffled() -> [Self.Element] Required

Returns the elements of the sequence, shuffled.

For example, you can shuffle the numbers between 0 and 9 by calling the shuffled() method on that range:

let numbers = 0...9
let shuffledNumbers = numbers.shuffled()
// shuffledNumbers == [1, 7, 6, 2, 8, 9, 4, 3, 5, 0]

This method is equivalent to calling shuffled(using:), passing in the system's default random generator.

Complexity: O(n), where n is the length of the sequence.

Declaration

@inlinable public func shuffled() -> [Self.Element]
func shuffled(using generator: inout T) -> [Self.Element] Required

Returns the elements of the sequence, shuffled using the given generator as a source for randomness.

You use this method to randomize the elements of a sequence when you are using a custom random number generator. For example, you can shuffle the numbers between 0 and 9 by calling the shuffled(using:) method on that range:

let numbers = 0...9
let shuffledNumbers = numbers.shuffled(using: &myGenerator)
// shuffledNumbers == [8, 9, 4, 3, 2, 6, 7, 0, 5, 1]
  • Parameter generator: The random number generator to use when shuffling the sequence.

Complexity: O(n), where n is the length of the sequence.

Note: The algorithm used to shuffle a sequence may change in a future version of Swift. If you're passing a generator that results in the same shuffled order each time you run your program, that sequence may change when your program is compiled using a different version of Swift.

Declaration

@inlinable public func shuffled<T>(using generator: inout T) -> [Self.Element] where T: RandomNumberGenerator
func sorted(by areInIncreasingOrder: (Self.Element, Self.Element) throws -> Bool) rethrows -> [Self.Element] Required

Returns the elements of the sequence, sorted using the given predicate as the comparison between elements.

When you want to sort a sequence of elements that don't conform to the Comparable protocol, pass a predicate to this method that returns true when the first element should be ordered before the second. The elements of the resulting array are ordered according to the given predicate.

In the following example, the predicate provides an ordering for an array of a custom HTTPResponse type. The predicate orders errors before successes and sorts the error responses by their error code.

enum HTTPResponse {
    case ok
    case error(Int)
}

let responses: [HTTPResponse] = [.error(500), .ok, .ok, .error(404), .error(403)]
let sortedResponses = responses.sorted {
    switch ($0, $1) {
    // Order errors by code
    case let (.error(aCode), .error(bCode)):
        return aCode < bCode

    // All successes are equivalent, so none is before any other
    case (.ok, .ok): return false

    // Order errors before successes
    case (.error, .ok): return true
    case (.ok, .error): return false
    }
}
print(sortedResponses)
// Prints "[.error(403), .error(404), .error(500), .ok, .ok]"

You also use this method to sort elements that conform to the Comparable protocol in descending order. To sort your sequence in descending order, pass the greater-than operator (>) as the areInIncreasingOrder parameter.

let students: Set = ["Kofi", "Abena", "Peter", "Kweku", "Akosua"]
let descendingStudents = students.sorted(by: >)
print(descendingStudents)
// Prints "["Peter", "Kweku", "Kofi", "Akosua", "Abena"]"

Calling the related sorted() method is equivalent to calling this method and passing the less-than operator (<) as the predicate.

print(students.sorted())
// Prints "["Abena", "Akosua", "Kofi", "Kweku", "Peter"]"
print(students.sorted(by: <))
// Prints "["Abena", "Akosua", "Kofi", "Kweku", "Peter"]"

The predicate must be a strict weak ordering over the elements. That is, for any elements a, b, and c, the following conditions must hold:

The sorting algorithm is not guaranteed to be stable. A stable sort preserves the relative order of elements for which areInIncreasingOrder does not establish an order.

  • Parameter areInIncreasingOrder: A predicate that returns true if its first argument should be ordered before its second argument; otherwise, false.

Complexity: O(n log n), where n is the length of the sequence.

Declaration

@inlinable public func sorted(by areInIncreasingOrder: (Self.Element, Self.Element) throws -> Bool) rethrows -> [Self.Element]
func split(maxSplits: Int = Int.max, omittingEmptySubsequences: Bool = true, whereSeparator isSeparator: (Self.Element) throws -> Bool) rethrows -> [ArraySlice<Self.Element>] Required

Returns the longest possible subsequences of the sequence, in order, that don't contain elements satisfying the given predicate. Elements that are used to split the sequence are not returned as part of any subsequence.

The following examples show the effects of the maxSplits and omittingEmptySubsequences parameters when splitting a string using a closure that matches spaces. The first use of split returns each word that was originally separated by one or more spaces.

let line = "BLANCHE:   I don't want realism. I want magic!"
print(line.split(whereSeparator: { $0 == " " })
          .map(String.init))
// Prints "["BLANCHE:", "I", "don\'t", "want", "realism.", "I", "want", "magic!"]"

The second example passes 1 for the maxSplits parameter, so the original string is split just once, into two new strings.

print(
   line.split(maxSplits: 1, whereSeparator: { $0 == " " })
                  .map(String.init))
// Prints "["BLANCHE:", "  I don\'t want realism. I want magic!"]"

The final example passes true for the allowEmptySlices parameter, so the returned array contains empty strings where spaces were repeated.

print(
    line.split(
        omittingEmptySubsequences: false,
        whereSeparator: { $0 == " " }
    ).map(String.init))
// Prints "["BLANCHE:", "", "", "I", "don\'t", "want", "realism.", "I", "want", "magic!"]"

Complexity: O(n), where n is the length of the sequence.

Declaration

@inlinable public func split(maxSplits: Int = Int.max, omittingEmptySubsequences: Bool = true, whereSeparator isSeparator: (Self.Element) throws -> Bool) rethrows -> [ArraySlice<Self.Element>]
func split(maxSplits: Int = Int.max, omittingEmptySubsequences: Bool = true, whereSeparator isSeparator: (Self.Element) throws -> Bool) rethrows -> [Self.SubSequence] Required

Returns the longest possible subsequences of the collection, in order, that don't contain elements satisfying the given predicate.

The resulting array consists of at most maxSplits + 1 subsequences. Elements that are used to split the sequence are not returned as part of any subsequence.

The following examples show the effects of the maxSplits and omittingEmptySubsequences parameters when splitting a string using a closure that matches spaces. The first use of split returns each word that was originally separated by one or more spaces.

let line = "BLANCHE:   I don't want realism. I want magic!"
print(line.split(whereSeparator: { $0 == " " }))
// Prints "["BLANCHE:", "I", "don\'t", "want", "realism.", "I", "want", "magic!"]"

The second example passes 1 for the maxSplits parameter, so the original string is split just once, into two new strings.

print(line.split(maxSplits: 1, whereSeparator: { $0 == " " }))
// Prints "["BLANCHE:", "  I don\'t want realism. I want magic!"]"

The final example passes false for the omittingEmptySubsequences parameter, so the returned array contains empty strings where spaces were repeated.

print(line.split(omittingEmptySubsequences: false, whereSeparator: { $0 == " " }))
// Prints "["BLANCHE:", "", "", "I", "don\'t", "want", "realism.", "I", "want", "magic!"]"

Complexity: O(n), where n is the length of the collection.

Declaration

@inlinable public func split(maxSplits: Int = Int.max, omittingEmptySubsequences: Bool = true, whereSeparator isSeparator: (Self.Element) throws -> Bool) rethrows -> [Self.SubSequence]
func starts(with possiblePrefix: PossiblePrefix, by areEquivalent: (Self.Element, PossiblePrefix.Element) throws -> Bool) rethrows -> Bool Required

Returns a Boolean value indicating whether the initial elements of the sequence are equivalent to the elements in another sequence, using the given predicate as the equivalence test.

The predicate must be a equivalence relation over the elements. That is, for any elements a, b, and c, the following conditions must hold:

Complexity: O(m), where m is the lesser of the length of the sequence and the length of possiblePrefix.

Declaration

@inlinable public func starts<PossiblePrefix>(with possiblePrefix: PossiblePrefix, by areEquivalent: (Self.Element, PossiblePrefix.Element) throws -> Bool) rethrows -> Bool where PossiblePrefix: Sequence
func suffix(_ maxLength: Int) -> [Self.Element] Required

Returns a subsequence, up to the given maximum length, containing the final elements of the sequence.

The sequence must be finite. If the maximum length exceeds the number of elements in the sequence, the result contains all the elements in the sequence.

let numbers = [1, 2, 3, 4, 5]
print(numbers.suffix(2))
// Prints "[4, 5]"
print(numbers.suffix(10))
// Prints "[1, 2, 3, 4, 5]"
  • Parameter maxLength: The maximum number of elements to return. The value of maxLength must be greater than or equal to zero.

Complexity: O(n), where n is the length of the sequence.

Declaration

@inlinable public func suffix(_ maxLength: Int) -> [Self.Element]
func suffix(_ maxLength: Int) -> Self.SubSequence Required

Returns a subsequence, up to the given maximum length, containing the final elements of the collection.

If the maximum length exceeds the number of elements in the collection, the result contains all the elements in the collection.

let numbers = [1, 2, 3, 4, 5]
print(numbers.suffix(2))
// Prints "[4, 5]"
print(numbers.suffix(10))
// Prints "[1, 2, 3, 4, 5]"
  • Parameter maxLength: The maximum number of elements to return. The value of maxLength must be greater than or equal to zero.

Complexity: O(1) if the collection conforms to RandomAccessCollection; otherwise, O(n), where n is the length of the collection.

Declaration

@inlinable public func suffix(_ maxLength: Int) -> Self.SubSequence
func suffix(from start: Self.Index) -> Self.SubSequence Required

Returns a subsequence from the specified position to the end of the collection.

The following example searches for the index of the number 40 in an array of integers, and then prints the suffix of the array starting at that index:

let numbers = [10, 20, 30, 40, 50, 60]
if let i = numbers.firstIndex(of: 40) {
    print(numbers.suffix(from: i))
}
// Prints "[40, 50, 60]"

Passing the collection's endIndex as the start parameter results in an empty subsequence.

print(numbers.suffix(from: numbers.endIndex))
// Prints "[]"

Using the suffix(from:) method is equivalent to using a partial range from the index as the collection's subscript. The subscript notation is preferred over suffix(from:).

if let i = numbers.firstIndex(of: 40) {
    print(numbers[i...])
}
// Prints "[40, 50, 60]"
  • Parameter start: The index at which to start the resulting subsequence. start must be a valid index of the collection.

Complexity: O(1)

Declaration

@inlinable public func suffix(from start: Self.Index) -> Self.SubSequence
func withContiguousStorageIfAvailable(_ body: (UnsafeBufferPointer<Self.Element>) throws -> R) rethrows -> R? Required

Call body(p), where p is a pointer to the collection's contiguous storage. If no such storage exists, it is first created. If the collection does not support an internal representation in a form of contiguous storage, body is not called and nil is returned.

A Collection that provides its own implementation of this method must also guarantee that an equivalent buffer of its SubSequence can be generated by advancing the pointer by the distance to the slice's startIndex.

Declaration

@inlinable public func withContiguousStorageIfAvailable<R>(_ body: (UnsafeBufferPointer<Self.Element>) throws -> R) rethrows -> R?